Sharp YO-370 Instrukcja Obsługi Pobierz pdf (Strona 82)

70 Revision 10 – 1/09/2015 FTS 370d/w/r

Section 4– Web Interface

Web Interface (Optional)

The Web Interface provides a convenient

way to configure the system, perform

Lighting Inspections and temporarily

control mode remotely. Additionally,

useful information such as alarm and event

history, cumulative runtime and

component temperature may be viewed via

the web interface.

With the optional WiFi antenna installed,

virtually any smartphone, tablet or laptop

computer with WiFi capabilities may be

used to access the system locally without

the need to install additional software.

System Access via WiFi

Follow the steps below to connect the

portable device to the host SC 370 unit.

1. Access the WiFi settings menu on the

device and verify that WiFi is enabled.

2. Locate the Network Selection menu

and choose “Other” or “Add

Network”

3. Type “Vanguard” in the Network

Name or SSID field.

4. Select “WPA2” in the security field.

5. Enter “Flashadmin” in the password

field and press “connect”.

6. Verify that the device is connected to

the “Vanguard” network and close the

WiFi settings menu.

7. Open an internet browser on the device

and enter the following web address:

192.168.1.11

8. The web browser will display a screen

similar to the one shown to the right.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 117 118

Brak uwag

Sharp YO-370 Instrukcja Obsługi Strona 82