Sharp YO-370 Instrukcja Obsługi Pobierz pdf (Strona 18)

6 Revision 10 – 1/09/2015 FTS 370d/w/r

ote:

Manual override can only be activated by the unit programmed as System 1. The

Manual Mode switch is disabled in subordinate units.

PCB1 Information Display and User Interface

A multi-line OLED (Organic Light-

Emitting Diode) display provides system

status, alarm and programming

information. Three pushbuttons located to

the immediate right of the display provide

the user interface for the system. The top

and bottom buttons move the cursor

position (*) up and down on the display.

The center button selects the action at the

cursor position. The information display

defaults to show the current system status

as well as the basic configuration for the

unit. See Section 3 for a detailed

description for all menu functions of the

information display. See Table 3-3 for a

complete list of alarms provided by the

information display.

Figure 1-3 – Information Display and User Interface

Manual Override

The Manual Mode

switch provides

temporary control of the

system’s operating

mode. When the manual

mode switch of the unit

programmed as System 1

is moved to either MAN DAY or MAN

NIGHT, the display reads “M-DAY” or

“M-NIGHT” respectively and the

corresponding Mode LED blinks. Manual

mode expires 30 minutes after initiating

the mode override. Each change to the

manual mode switch restarts the 30 minute

timer. The Manual Mode switch must be

moved after power up to activate mode

override. The switch has no effect if it is

set to Day or Night before power up.

Status and Alarm LEDs

Twelve Status and Alarm LEDs are

provided for immediate visual reference of

the current status of the unit. Table 1-3

describes the function of each LED.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 117 118

Komentarze do niniejszej Instrukcji

Brak uwag

Sharp YO-370 Instrukcja Obsługi Strona 18

Komentarze do niniejszej Instrukcji