Sharp YO-370 Instrukcja Obsługi Strona 75
- Strona / 118
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
FTS 370d/w/r Revision 10 – 1/09/2015 63
Monitoring
Configuration
(System 1
Only)
Load Factory Default
Yes /No
Yes Confirm?
Default of Primary / Alternate Monitoring
Local Ethernet
Configuration
IP Address Mode
Static
Dynamic
IP Address XXX.XXX.XXX.XXX
Subnet Mask XXX.XXX.XXX.XXX
Default Gateway XXX.XXX.XXX.XXX
MAC Address XXXXXXXXXXXX
Primary
Data
Monitoring
Monitoring Method: Disabled
Monitoring
Method:
Cellular
Eagle 2.0
Autoupdate: XX Hours -
XX Minutes
Hours (Enter Value Ranging From 0 - 24)
Minutes (Enter Value Ranging From 0 - 59)
Primary Server IP Address (Enter IP Address)
Primary Server Port 54630
Alternate Server IP Address (Enter IP Address)
Alternate Server Port 54630
Listen Port 54631
Sim Card: (AT&T Direct or
AT&T ROW)
1
Select AT&T Direct (SIM is Blue/White
Front, Orange Back)
Select AT&T ROW (Rest Of World) (SIM
Is Solid White)
Monitoring
Method:
RS 485
Modbus
RTU
Autoupdate: Disabled
Baud Rat: 9600
Station Address: 2
Monitoring
Method:
Ethernet
SNMP
2
Autoupdate: XX Hours -
XX Minutes
Hours (Enter Value Ranging From 0 - 24)
Minutes (Enter Value Ranging From 0 - 59)
Primary Server IP Address (Enter IP Address)
Primary Server Port (Enter Port Number Range Is 0 - 65535)
Alternate Server IP Address (Enter IP Address)
Alternate Server Port (Enter Port Number Range Is 0 - 65535)
Listen Port (Enter Port Number Range Is 0 - 65535)
Monitoring
Method:
Ethernet
Modbus
Autoupdate: Disabled
Listen Port: 00502
Station Address: 2
Monitoring
Method:
Ethernet
Eagle 2.0
Autoupdate: XX Hours -
XX Minutes
Hours (Enter Value Ranging From 0 - 24)
Minutes (Enter Value Ranging From 0 - 59)
Primary Server IP Address (Enter IP Address)
Primary Server Port (Enter Port Number Range Is 0 - 65535)
Alternate Server IP Address (Enter IP Address)
Alternate Server Port (Enter Port Number Range Is 0 - 65535)
Listen Port (Enter Port Number Range Is 0 - 65535)
Alternate
Data
Monitoring
Same Menu as Primary Data Monitoring.
3
Commit
Settings
Yes /No
Yes Confirm?
1. Menu option applies to AT&T HSPA modems only. Menu is not shown when Verizon CDMA modem is installed.
2. Ethernet SNMP, if used, must be selected as the Primary Data Monitoring method.
3. Monitoring Options are mutually exclusive. Example: If RS 485 Modbus RTU is selected in either menu, it is removed
from the available options in the other menu.
- VANGUARD 1
- FTS 370d, 370w, 370r 1
- System Controller (SC) 370 5
- Flashhead CABLE 5
- Front Matter 7
- Personnel Hazard Warning 8
- Table of Contents 9
- List of Figures 11
- List of Tables 12
- System Overview 13
- Specifications 14
- Operation Overview 16
- PCB1 Controller Board 17
- Manual Override 18
- Status and Alarm LEDs 18
- P2 Auxiliary Input 21
- J4 Communication Cable 21
- Connection 21
- PCB3 Smart Board 22
- GPS Sync. Kit 22
- USB Port 22
- FH 370d/w/r 23
- Controller Installation 26
- Input Power 27
- Photodiode Wiring 27
- Photodiode Mounting 27
- Cellular Antenna 28
- GPS Antenna 29
- Communication Cable Kit 31
- Dry Contact Alarm Outputs 33
- Flashhead Cable 33
- Wiring Procedure 33
- Securing the Cable 34
- Flashhead Installation 37
- DETAIL A 40
- 15.75 (400) 43
- 7.5 (190.5) 43
- KNOCKOUT SIZE DIA 45
- PHOTODIODE 50
- INTERFACE BOX 52
- Standard System 56
- LOW BATT 64
- MARKER INTERFACE 66
- (P/N 2422000) 66
- (P/N 1362034) 66
- The photodiode 68
- Marker Mode 68
- Red Flash Mode 68
- IR Enable 70
- IR Is Night Alarm 70
- Local Tower Config 72
- Local Ethernet Configuration 74
- Primary Data Monitoring 74
- Alternate Data Monitoring 74
- Site Event History 76
- Lighting Inspection (LI) 78
- Mode Override 79
- System Reboot 79
- System X Firmware 79
- USB Firmware Update 80
- Information Display Alarms 80
- Section 4– Web Interface 82
- Auto Fast LI 83
- Manual Fast LI 83
- Manual Staged LI 83
- Auxiliary Input 84
- Tower Lighting 85
- System “X” 86
- Monitoring 87
- SNMP Labels 87
- Cellular Modem 88
- Troubleshooting 90
- Component Removal and 93
- Replacement 93
- EHTERNET 98
- 1 2 3 4 5 98
- Table 6-4 – Marker Interface 100
- Critical 102
- Table A-1 – Critical INFORMs 103
- Table A-2 – Warning INFORMs 104
- Modbus RTU over RS485 106
- Modbus RTU over TCP 106
- Implemented Modbus Map 106
- RMA Policy Revision 2014B 117
- Revision 2014B RMA Policy 118
© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.032 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji