Sharp YO-370 Instrukcja Obsługi Pobierz pdf (Strona 26)

14 Revision 10 – 1/09/2015 FTS 370d/w/r

Section 2 – Mounting and Installation

Unpacking

Inspect shipping cartons for signs of damage

before opening. Check package contents

against the packing list and inspect each

item for visible damage. Report damage

claims promptly to the freight handler.

Note: Record equipment serial numbers

for future reference.

Recommended Tools

Flash Technology recommends the

following tools for installation and

maintenance:

• Single Beacon Installation kit.

(Part # F1370990)

• 1/8” non-flared flat blade screw driver

• 9 or 12 inch, flat blade #2 screwdriver

• #2 Phillips

®

head screwdriver

• Set of combination wrenches

• Assorted nut driver handles: 1/4”,

5/16”, 3/8” recommended

• Long-nose pliers

• Wire Strippers

• Digital volt-ohm meter

• Level

• Cable Ties

• Tin Snips

• Camera (for documentation)

Controller Installation

WARNING!

Read the warning on Page ii now.

Disconnect primary power before opening

enclosures.

Verify the Installation

Upon completion of the system installation,

verify that the Information Display, located

on PCB1, shows the correct configuration

for System 1 and each subordinate unit

installed in the system. See Section 3 for a

detailed description of the menu and all

functions of the information display.

SC 370 Access

The cover is hinged and secured with knobs

that rotate (clockwise) to latch. Rotate the

knobs counterclockwise and swing the cover

open for internal access.

Note: The stainless steel enclosure is

secured with latches.

Mounting

The SC370 enclosure mounting outline and

dimensions are shown in Figure 2-8

(Stainless Steel option shown in Figure 2-9).

Mounting hardware is not provided unless it

is ordered as part of an installation kit. Use

the following guidelines for mounting the

SC 370:

 Ensure that adequate space exists

around the equipment for access during

installation, maintenance and servicing.

 Allow space for airflow around the

controller.

Mounting Adapter Panel

(Optional)

The optional Mounting Adapter Panel,

shown in Figure 2-10, allows for easier

installation of the FTS 370d/w/r system by

removing the need for modifying the

existing outdoor H-Frame when upgrading

from previously installed Flash Technology

products. The H-Frame may require

adjustment when upgrading from non-Flash

Technology lighting products if the adapter

panels are requested. Please contact the

Flash Technology parts department at 1-

800-821-5825 if this option is desired.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 117 118

Komentarze do niniejszej Instrukcji

Brak uwag