Sharp YO-370 Instrukcja Obsługi Strona 79
- Strona / 118
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
FTS 370d/w/r Revision 10 – 1/09/2015 67
Mode Override
Mode Override allows the system to be
manually placed in any capable mode for a
user definable period of up to 24 hours.
Once the mode override function has been
activated, Override Mode will show the
operating mode of the system. Override
Left displays the amount of time
remaining in the current Override Mode.
Cancel Override returns the system to
normal operation with mode control
directed by the photodiode.
Mode
Override
Start Mode Override
Override Mode
White Day
1
White Night
Red Night
2
Override Time
Hours (Enter Value Ranging From 0 - 24)
Minutes (Enter Value Ranging From 0 - 59)
Start Override
Yes /No
Cancel Override
Yes /No
Override Mode: (Displays The Current Override Mode)
Override Left: (Displays The Amount Of Time Remaining In The Current Override Mode)
1. System will not flash when Override Mode “White Day” is selected for systems programmed as “Tower Type Red”
2. Option will not be displayed for systems programmed as “Tower Type White”.
System Reboot
This feature allows an individual SC 370
to restart without physically interrupting
the power.
Note: Firmware Version 3.1 or higher
required.
System Reboot
Yes /No
Yes Confirm?
System X Firmware
This feature allows System 1 to display,
and if appropriate, upgrade the firmware
version of each connected subordinate unit
to its current version.
Note: Subordinate units must be firmware
Version 3.0 or higher to receive the
firmware upgrade from System 1.
System X
Firmware
1
Help
This Menu Allows You To Upgrade The Firmware Of Subordinate Vanguard System
Controllers. You May Upgrade A Particular Controller Or All Controllers. When
Started, This Controller Will Transfer Its Firmware Package To The Target Controllers.
Once Complete, The Target Controllers Will Reboot With The New Firmware.
System 1 [V 3.1]
Upgrade
All
2
Yes/No
Yes Confirm?
System 2 -
6 [V X.X]
2
Yes/No
Yes Confirm?
1. Firmware Version 3.1 or higher required.
2. Progress will be displayed as a percentage on the master and subordinate unit(s) during the upgrade. The upgraded
subordinate unit(s) will reboot immediately after firmware upgrade is complete.
- VANGUARD 1
- FTS 370d, 370w, 370r 1
- System Controller (SC) 370 5
- Flashhead CABLE 5
- Front Matter 7
- Personnel Hazard Warning 8
- Table of Contents 9
- List of Figures 11
- List of Tables 12
- System Overview 13
- Specifications 14
- Operation Overview 16
- PCB1 Controller Board 17
- Manual Override 18
- Status and Alarm LEDs 18
- P2 Auxiliary Input 21
- J4 Communication Cable 21
- Connection 21
- PCB3 Smart Board 22
- GPS Sync. Kit 22
- USB Port 22
- FH 370d/w/r 23
- Controller Installation 26
- Input Power 27
- Photodiode Wiring 27
- Photodiode Mounting 27
- Cellular Antenna 28
- GPS Antenna 29
- Communication Cable Kit 31
- Dry Contact Alarm Outputs 33
- Flashhead Cable 33
- Wiring Procedure 33
- Securing the Cable 34
- Flashhead Installation 37
- DETAIL A 40
- 15.75 (400) 43
- 7.5 (190.5) 43
- KNOCKOUT SIZE DIA 45
- PHOTODIODE 50
- INTERFACE BOX 52
- Standard System 56
- LOW BATT 64
- MARKER INTERFACE 66
- (P/N 2422000) 66
- (P/N 1362034) 66
- The photodiode 68
- Marker Mode 68
- Red Flash Mode 68
- IR Enable 70
- IR Is Night Alarm 70
- Local Tower Config 72
- Local Ethernet Configuration 74
- Primary Data Monitoring 74
- Alternate Data Monitoring 74
- Site Event History 76
- Lighting Inspection (LI) 78
- Mode Override 79
- System Reboot 79
- System X Firmware 79
- USB Firmware Update 80
- Information Display Alarms 80
- Section 4– Web Interface 82
- Auto Fast LI 83
- Manual Fast LI 83
- Manual Staged LI 83
- Auxiliary Input 84
- Tower Lighting 85
- System “X” 86
- Monitoring 87
- SNMP Labels 87
- Cellular Modem 88
- Troubleshooting 90
- Component Removal and 93
- Replacement 93
- EHTERNET 98
- 1 2 3 4 5 98
- Table 6-4 – Marker Interface 100
- Critical 102
- Table A-1 – Critical INFORMs 103
- Table A-2 – Warning INFORMs 104
- Modbus RTU over RS485 106
- Modbus RTU over TCP 106
- Implemented Modbus Map 106
- RMA Policy Revision 2014B 117
- Revision 2014B RMA Policy 118
© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.027 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji