Sharp PC-9300 Informacje Techniczne Pobierz pdf (Strona 56)

9 Troubleshooting

www.turnerbiosystems.com 51

Injector 2 not

installed

The protocol requires addition

of reagent using Injector 2 but

it is not detected

• Verify Injector 2 is installed correctly by

checking all connections and looking

for an INJECTOR icon on the

INSTRUMENT STATUS bar

Luminometer not

installed

Instrument does not detect the

Luminescence Module

• Verify the module is installed

• If the module is installed, try rebooting

the instrument

• If the instrument still does not detect

the module, call Technical Support

Fluorometer not

installed

Instrument does not detect the

Fluorescence Module

• Verify the module is installed

• If the module is installed, try rebooting

the instrument

• Undo the two set screws on the

module

• Inspect the connectors for defect

• If the instrument still does not detect

the module, call Technical Support

Absorbance

Module not

installed

Instrument does not detect the

Absorbance Module

• Verify the module is installed

• If the module is installed, try rebooting

the instrument

• If the instrument still does not detect

the module, call Technical Support

Open the door

manually. Install

the “x” Optical Kit

The protocol requires the use

of a particular Optical Kit but

the instrument is not detecting

the presence of any Optical Kit

• Insert the desired Optical Kit into the

detection head

• The color label of the Optical Kit

should face up, toward the user

• Firmly insert the optical kit into the

Fluorescence Module

Open the door

manually.

Replace the “x”

Optical Kit with

the “y” Optical Kit

The wrong Optical Kit is

installed for the specified

protocol parameter

• Install the correct Optical Kit or change

the protocol parameter

Input string was

not in correct

format

Too many commands were

entered at the same time

• Re-enter only one desired command at

a time

Instrument is not

initialized

The connected PC has

instrument control, disabling

control of the Modulus™

Microplate Reader via its built-

in touch screen

• Use the PC software to run the

instrument

No Data to Copy

This error message indicates

that no results files are

available

• Ensure there is at least one results file

to copy

G System

missing. Press

any button to

restart

A USB flash drive is plugged

into the USB port on the front

of the instrument

• Remove the USB flash drive from the

USB port and reboot the instrument

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 67 68

Komentarze do niniejszej Instrukcji

Brak uwag