Sharp CP-C405 Instrukcja Obsługi Pobierz pdf (Strona 2)

CDP-200GS

– 2 –

POWER SAVING FUNCTION DIAGNOSIS

TIMING SPECIFICATION

MODE AT PRODUCTION MODE 1 MODE 2 MODE 3 MODE 4 MODE 5 MODE 6 MODE 7 MODE 8 MODE 9 MODE 10 MODE 11

RESOLUTION 640 X 480 800 X 600 800 X 600 832 X 624 1024 X 768 1024 X 768 1024 X 768 720 X 400 640 X 480 1280 X 1024 1280 X 1024

CLOCK 25.175 MHZ 49.500 MHz 56.250 MHz 57.283 MHz 78.750 MHz 80.000 MHz 94.500 MHz 28.322 MHz 36.000 MHz 135.000 MHz 108.000 MHZ

-- HORIZONTAL --

H-FREQ 31.469 kHz 46.875 kHz 53.674 kHz 49.725 kHz 60.024 kHz 60.241 kHz 68.677 kHz 31.469 kHz 43.269 kHz 79.976 kHz 63.981 kHz

usec usec usec usec usec usec usec usec usec usec usec

H. TOTAL 31.778 21.333 18.631 20.111 16.66 16.6 14.561 31.777 23.111 12.504 15.63

H. BLK 6.356 5.172 4.409 5.586 3.657 3.8 3.725 6.355 5.333 3.022 3.778

H. FP 0.636 0.323 0.569 0.559 0.203 0.4 0.508 0.636 1.556 0.119 0.444

H. SYNC 3.813 1.616 1.138 1.117 1.219 1.2 1.016 3.813 1.556 1.067 1.037

H. BP 1.907 3.232 2.702 3.91 2.235 2.2 2.201 1.907 2.222 1.837 2.296

H. ACTIV 25.422 16.162 14.222 14.524 13.003 12.8 10.836 25.422 17.778 9.481 11.852

-- VERTICAL --

V. FREQ(HZ) 59.940 Hz 75.000 Hz 85.061 Hz 74.550 Hz 75.030 Hz 74.927 Hz 84.997 Hz 70.087 Hz 85.008 Hz 75.025 Hz 60.020 Hz

lines lines lines lines lines lines lines lines lines lines lines

V. TOTAL 525 625 631 667 800 804 808 449 509 1066 1066

V. BLK 45 25 31 43 32 36 40 49 29 42 42

V. FP 1011113112111

V. SYNC 23333332333

V. BP 33 21 27 39 28 30 36 35 25 38 38

V. ACTIV 480 600 600 624 768 768 768 400 480 1024 1024

-- SYNC --

INT(G) NO NO NO NO NO NO NO NO NO NO NO

EXT(H/V)/POLARITY YES -/- YES +/+ YES +/+ YES -/- YES +/+ YES -/- YES +/+ YES -/+ YES +/+ YES +/+ YES +/+

EXT(CS)/POLARITY NO NO NO NO NO NO NO NO NO NO NO

INT/NON INT NON INT NON INT NON INT NON INT NON INT NON INT NON INT NON INT NON INT NON INT NON INT

97. 11. 14 Ver.

u indicator

Green

Green and orange

alternate

Green and orange

alternate

Orange

Off

Power

consumption

mode

Normal

operation

Standby

(1st mode)

Suspend

(2nd mode)

Active-off

(3rd mode)

Power-off

Power

consumption

≤ 120 W

(CPD-200GS)

≤ 110 W

(CPD-100GS)

≤ 15 W

≤ 8 W

0 W

Recovery

time

—

Approx.

5 sec.

Approx.

5 sec.

Approx.

15 sec.

—

This monitor has three modes of reduced power

consumption. By sensing the absence of video signal

coming from the computer, it reduces power consumption

as follows.

Note

If the video signal cable is not connected, the “NO INPUT

SIGNAL” message (page 18) appears. After 30 seconds, the

power saving function automatically puts the monitor into the

active-off mode and the u indicator lights up orange. Once

the horizontal and vertical sync signals are detected, the

monitor automatically resumes its normal operation mode.

This monitor is equipped with a self-diagnosis function. Use

this function if there is a problem with your monitor or

computer.

1 Disconnect the video input cable or turn off the

connected computer.

2 Turn the monitor off and on.

3 Press and hold the >/ button for 2 seconds.

If all four color bars appear (white, red, green, blue) after

a few seconds, the monitor is working properly but there

might be a problem with your computer. Contact your

computer’s manufacturer.

If the color bars do not appear, there is a potential

monitor failure. Inform your authorized Sony dealer of

the monitor’s condition.

1 2 3 4 5 6 7 ... 33 34

Komentarze do niniejszej Instrukcji

Brak uwag

Sharp CP-C405 Instrukcja Obsługi Strona 2

Komentarze do niniejszej Instrukcji