Sharp 21F-A30 Instrukcja Operatora Pobierz pdf (Strona 78)

OPERATION

Form 169000 / 169040 76 Revision C

l. Check reel drive chain tension. Total chain

slack at (K) should be 1/4 in. (6 mm).

If necessary, adjust as follows:

1. Loosen bolt (L) on sprocket and jam-nut on

adjuster bolt (M).

2. Turn adjuster bolt (M) to move idler sprocket

“downward” until chain slack is achieved as

above.

3. Rotate auger and check chain for slack at

tightest point. Re-adjust position of idler

sprocket to achieve required slack.

4. Tighten jam-nut at (M) and nut (L) on

sprocket. Re-check tension.

m. Close shields before engaging header.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 191 192

Brak uwag

Sharp 21F-A30 Instrukcja Operatora Strona 78