Sharp PG-C45S Operation Instrukcja Użytkownika Pobierz pdf (Strona 19)

www.extron.com 19

T E C H C O R N E R

Conﬁguring the System 5 IP

Going through a few of the software set-

up screens demonstrates how quickly the

System 5 IP can be conﬁgured to meet the

needs of a simple, single projector installa-

tion. Let’s walk through the set-up process

by conﬁguring the switcher to work with a

Sharp PG-C45S Projector. Conﬁguring the

System 5 IP to control a projector is fast and

easy. (See Figure 2.)

Under the RS232/IR Conﬁg. Tab, click or

select the following operations:

1. Click the “Projector Port” button.

2. Under “Output Port Conﬁguration,”

select “RS 232.”

3. Under “Serial Selection,”

select “Use default in driver.”

4. Under “Driver Category,”

select “Video Projector.”

5. Under “Device Models,” select “Sharp PG-C45S.”

6. Click the “Add Port/Device Deﬁnition” button.

Conﬁgure the Projector Buttons

Now, we will associate the Power: On and

Power: Off functions of the Sharp PG-C45S’s

driver to the front panel buttons on the

System 5 IP. (See Figure 3.)

From the Button Conﬁg. tab, click the

“Projector ON” button. A sub-menu appears:

1. In the “Type of Operation,” select “Driver

Operations.”

2. Under “When,” enter a check in the “Press” box.

3. Under “Port and Device Models Available,” select

“Proj Cont [232]: Sharp PG-C45S.”

4. Under “Function Name,” select “Power: On.”

When you click the “Take Button Conﬁg.”

button, the conﬁguration is set and a green

circle is placed on the “Projector ON” but-

ton. To conﬁgure the “Projector OFF” but-

ton, follow the instructions above, but under

“Function Name,” select “Power: Off” in

place of “Power: On.”

We can continue in the same manner to

conﬁgure the software until we have loaded

all the drivers for any connected A/V devices

and conﬁgured the associated buttons and

switcher operations. Additional control pan-

els such as the Extron SCP150 can be added

and conﬁgured to remotely operate the

switcher. To round out

the System 5 IP’s capa-

bilities, IR control mod-

ules such as the Extron

IRCM-DV+, which pro-

vides a remote control

point for a DVD and VCR,

are conﬁgured in the

Button Conﬁg. tab. Once

the conﬁguration is com-

plete, clicking the “Build

& Apply Conﬁguration”

button will store the set-

tings into conﬁguration

ﬁles and upload the ﬁles

into the System 5 IP.

Back to the Network

Remember the em-

bedded Web page of the

System 5 IP? Go back to

your browser and en-

ter the IP address of the

switcher, and you will

see your fully conﬁgured

System 5 IP and the ad-

vantage IP Link offers:

Every action taken by the

switcher is shown on the

Web page. Projector lamp

hours can be monitored

from the Status tab. You can also monitor the

projector’s connection to the switcher. In both

of these examples, the System 5 IP can send

an e-mail to you or the local A/V administra-

tor of a pending lamp expiration or a missing

projector. Imagine the time and money saved

by making a service call by remotely viewing

the System 5 IP embedded Web pages versus

making a visit to the installation site.

Asset Management

The need to troubleshoot an installation

from miles away is critical in the competitive

A/V market. In addition, integrators are looking

for ways to stay involved with their customers

after the installation is completed. The asset

management capabilities built into IP Link

is just one element that makes the Extron

System 5 IP so powerful. The local control of

all the elements of a presentation environ-

ment is another key advantage. Although

the switcher may require conﬁguration when

installed, the power unleashed through the

ability to provide remote and local control as

well as asset management far outweigh the

time spent in conﬁguration. This is the prem-

ise all future A/V systems will be built upon

— asset management over IP will provide cus-

tomer support and cost savings.

As you can see, the System 5 IP with its

Conﬁguration Software is not only easy to

set up but is a ﬂexible platform for your A/V

designs. The switcher is a highly capable cen-

terpiece of any single projector installation

design, and now with IP Link, the System 5 IP

provides a system interface that is accessible

from anywhere.

www.extron.com 19

Figure 2. Conﬁguring the switcher to work with the projector.

Figure 3. Conﬁguring the projector buttons.

1 2 ... 14 15 16 17 18 19 20

Komentarze do niniejszej Instrukcji

Brak uwag

Sharp PG-C45S Operation Instrukcja Użytkownika Strona 19

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Projektory Sharp PG-C45S Operation