Sharp R-450E Instrukcja Operatora Pobierz pdf (Strona 20)

FUEL HANDLING

Fueling

WARNING! Taking the following

precautions, will lessen the risk of fire:

Do not smoke and do not place any hot

objects in the vicinity of fuel,

Always stop the engine and let it cool for

a few minutes before refuelling.

When refuelling, open the fuel cap slowly

so that any excess pressure is released

gently.

Tighten the fuel cap carefully after

refuslling,

Always move the machine away from the

refuelling area before starting.

Clean the area around the fuel cap. Clean the fuel and

chain oil tanks regularly. The fuel filter must be replaced

at least once a year. Contamination in the tanks causes

malfunction. Make sure the fuel is well mixed by shaking

the container before refuelling.The capacities of the chain

oil tank and fuel tank are carefully matched.You should

therefore always fill the chain oil tank and fuel tank at the

same time.

WA.N,NG,Fo;,andrue, spor

flammable.Take care when handling fuel |

| _ and chain oil, Be aware ef the risks of |

explosion and those ass0ciated with |

inhalation.

Fuel safety

Never refuel the machine while the engine is running.

Make sure there is plenty of ventilation when refuelling

or mixing fuel (gasoline and 2-stroke oil).

Move the machine at least 10 ft (3 m) from the

refuelling point before starting it.

Never start the machine:

1 If you have spilled fuel or chain oil on the machine. Wipe

off the spillage and allow remaining fuel to evaporate.

2 If you have spilled fuel on yourself or your clothes,

change your clothes. Wash any part of your body that

has come in contact with fuel. Use soap and water.

3 If the machine is leaking fuel. Check regularly for leaks

from the fuel cap and fuel lines.

| _ and ignition cable. A risk of sparking |

arises, which can cause a fire. -

Transport and storage

Always store the chain saw and fuel so that there is no

risk of leakages or fumes coming into contact with

sparks or naked flames from electrical equipment,

electric motors, relays/switches, boilers and the like.

Always store fuel in an approved container designed

for that purpose.

For longer periods of storage or for transport of the

chain saw, the fuel and chain oil tanks should be

emptied. Ask where you can dispose of waste fuel and

chain oil at your local gas station.

Ensure the machine is cleaned and that a complete

service is carried out before long-term storage.

The bar guard must always be fitted to the cutting

attachment when the machine is being transported or

in storage, in order to prevent accident contact with

the sharp chain. Even a non-moving chain can cause

serious cuts to yourself or persons you bump into with

an exposed chain.

Remove the spark plug cap from the spark plug.

Activate the chain brake.

Long=term storage

Empty the fuel/oil tanks in a well ventilated area. Store the

fuel in approved cans in a safe place. Fit the bar guard.

Clean the machine. See instructions under the heading

Maintenance schedule.

20 - English 545186839 Rev. 1 2008-06-27

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Komentarze do niniejszej Instrukcji

Brak uwag

Sharp R-450E Instrukcja Operatora Strona 20

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Piły łańcuchowe Sharp R-450E