Sharp SD-PX2 Instrukcja Użytkownika Strona 27

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 64
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 26
Configuration and Operation
M9328MX21ADSE Users Manual, Rev. A
Freescale Semiconductor 2-17
2.5.7 Using the TV Encoder Card
A TV encoder card is supplied with the ADS. The main component is a FS453LF (PC to TV Video Scan
converter) from FOCUS Enhancements Semiconductor. For details on TV encoder operation, refer to its
data sheet, available at http://www.focusinfo.com/
CAUTION
Make sure that input power is disconnected or switched off before the TV
encoder card is installed. Connecting the card with power applied can
damage the TV encoder card and the Base board.
This TV encoder cannot be used at the same time as the LCD display because they share connector P7 on
the Base board. To use the TV encoder module, you must disconnect the LCD board from P7 on the Base
board and install the TV encoder module in P7 and P13 of the Base board.
Przeglądanie stron 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 63 64

Komentarze do niniejszej Instrukcji

Brak uwag