Sharp LC-70LE632U Instrukcje Operacyjne Pobierz pdf (Strona 59)

Using a PC

• The TV can be controlled from a PC, control panels

and other devices using the RS-232C or IP.

Use a cross-type RS-232C cable, ETHERNET cable

(commercially available) or wireless LAN for the

connections.

o Thisoperation system should be used by a person who is

accustomed to usingcomputers.

[] Communication conditions for IP

Connect to the TV with the following settings made for

IP on the PC.

TOP/IP

Set the IPaddress on the TV menu

None(Donot selectTelnetor SSH)

Set a port numberon the TV menu

(Controlport)

When you set your ID and password on the TV menu,

you need to enter them as soon as you connect to the

TV.

o The connection will be cut off when there has been no

communication for 3 minutes.

Example

[] Communication conditions for RS=232C

Set the RS-232C communication settings on the PC to

match the TV's communication conditions.

The TV's communication settings are as follows:

9,600 bps

8 bits

None

1 bit

None

[] Communication procedure

Send the control commands from the PC via the RS-

232C or IP.

The TV operates according to the received command

and sends a response message to the PC.

Do not send multiple commands at the same time.

Wait until the PC receives the OK response before

sending the next command.

[] Command format

EightASCII codes ÷ CR

021031041plIP2P3IP4141

",........................................................./ / \ ...........................................................]...............................................x /

Command4-digits Parameter4-digits Returncode

Command4-digits: Command. The text of four characters.

Parameter4-digits: Parameter0-9, x, blank, ?

AQUOS

NET APPS

[] Parameter

Input the parameter values, aligning left, and fill with

blank(s) for the remainder. (Be sure that 4 values are

input for the parameter.)

When the input parameter is not within an adjustable

range, "ERR" returns. (Refer to "Response code format".)

Any numerical value can replace the "x" on the table.

When "?" is input for some

commands, the

present setting

value responds.

1 Press MENU to display the MENU screen, and then

press 4/1_ to select "Initial Setup".

2 Press A/V to select "lnternet Setup", and then

press ENTER.

3 Press A/T to select "Network Setup", and then

press ENTER.

4 Press A/T to select "IP Control Setup", and then

press ENTER.

5 Press _/l_ to select "Change", and then press

ENTER.

6 To use IP Control, press 4/1_ to select "Enable",

and then press ENTER.

7' Set the device name.

8 Set your Iogin ID and password.

9 Set the port to use with IP Control.

10 Confirm the settings, and then press "OK".

[] Response code format

Normalresponse Problem response(communication

erroror incorrectcommand)

Return code (0DH)

Q- 57

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 83 84

Komentarze do niniejszej Instrukcji

Brak uwag

Sharp LC-70LE632U Instrukcje Operacyjne Strona 59

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Telewizory LCD Sharp LC-70LE632U