Sharp PC-9080 Dokumentacja Pobierz pdf (Strona 79)

4-4 Installing a Memory Module

7. Slowly move the memory module to a horizontal position until the locking tabs

snap into the retaining notches or holes at each end of the module.

Figure 4-3. Securing the Memory Module

8. Repeat the same for the other memory module into the upper socket.

9. Close the memory expansion cover. Then close the PC card slot cover and

return the locking knob to its original position.

Removing Memory Modules

To remove a pair of memory modules, for example, when you replace the pair with

another pair of modules of a larger capacity, follow these steps:

1. Open the memory expansion cover as described in the Installing a Memory

Module section.

2. When removing, be gentle and always start from the memory module on the

top.

3. Push the retaining notches which secure the memory module outwards until the

memory module comes out of the nothces. Gently move the memory module

upward and remove it.

4. Repeat the same with the other memory module of the pair.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 113 114

Brak uwag

Sharp PC-9080 Dokumentacja Strona 79