Sharp Actius PC-RD20 Dokumentacja Pobierz pdf (Strona 36)

Prepare Parts for Reassembly

MAINTENANCE MANUAL

11. Install two long studs in the differential to

guide the differential into the housing.

12. Immediately install the differential into the

housing to compress the liquid gasket

evenly between the differential faces and

the housing.

CAUTION

APPLY SILICONE GASKET MATERIAL IN

A CONTINUOUS 0.125 INCH (3 MM) BEAD.

IF YOU USE MORE THAN THIS AMOUNT,

GASKET MATERIAL CAN BREAK OFF AND

PLUG LUBRICATION PASSAGES. DAMAGE

TO COMPONENTS CAN RESULT.

13. Apply a 0.125-inch (3 mm) bead of Loctite®

242 threadlocker around the capscrew

threads approximately 0.25-inch (6 mm)

from the end. Apply a 0.125 inch (3 mm)

bead of Loctite® 242threadlocker across

the length of the threads. Figure 4.13.

14. Install the capscrews. Use a crossing pat-

tern to tighten the capscrews evenly. The

capscrews must be tightened within10

minutes of initial application of Loctite®

242 threadlocker.

• Tightenthe1/2-inchcapscrewsto140lb-ft

(190 N m).

• Tightenthe5/8-inchcapscrewsto225lb-ft

(306 N m).

15.Waitaminimumof60minutesbeforell-

ing the assembly with lubricant. See Sec-

tion 7.

Fork and General U-Joint Reassembly

Install the fork general u-joint capscrews by

handafterseatingtheU-joint.Tightenthecap-

screws according to the manufacturer’s torque

specications.

Identication

Gear Sets

See Table A, Table B, Table C and Table D

for information on identifying gear sets with

matched parts. Always check match numbers

to verify that the gear set you will install has

matched parts. Figure 4.14.

CAUTION

APPLY SILICONE GASKET MATERIAL IN

A CONTINUOUS 0.25 INCH (6 MM) BEAD.

IF YOU USE MORE THAN THIS AMOUNT,

GASKET MATERIAL CAN BREAK OFF AND

PLUG LUBRICATION PASSAGES. DAMAGE

TO COMPONENTS CAN RESULT.

10. Apply a 0.25 inch (6 mm) bead of Loctite®

5699 silicone gasket material to the hous-

ing face. Do not use ThreeBond1216E sili-

cone products. Figure 4.12.

Figure 4.12

Figure 4.13

DIAMETER SILICONE

GASKET BEAD 0,25” (6MM

360˚LOCTITE®BEAD

6 mm

LOCTITE® 242 THREADLOCKER APPLICATION

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 119 120

Komentarze do niniejszej Instrukcji

Brak uwag

Philips SWV2510/10 Datový list (2 strany)

Značka: Philips | Kategorie: Composite video cables | Velikost: 0.24 MB |

Tabulka s obsahem

Ensure a reliable connection

SWV2510/10

Další produkty a příručky pro Kompozitní video kabely Philips

Modely	Typ Dokumentu
SWV3212W/27	Datový list Philips SWV3212W 6 ft Composite A/V cable, 2 stránky
SWV3212W/10	Datový list Philips Composite A/V cable SWV3212W, 2 stránky
SWV2223W/10	Datový list Philips Composite video cable SWV2223W, 2 stránky
SWV2534W/10	Datový list Philips Composite A/V cable SWV2534W, 2 stránky
SWV3214W/10	Datový list Philips Composite A/V cable SWV3214W, 2 stránky
SWV3532/10	Datový list Philips 1.5 m Stereo Audio Composite A/V cable, 2 stránky
SWV2510T/10	Datový list Philips Composite video cable SWV2510T, 2 stránky
SWV2532/10	Datový list Philips Composite A/V cable SWV2532, 2 stránky
SWV2120NB/97	Datový list Philips SWV2120NB 1,5 m Composite video cable, 2 stránky
SWV3214W/27	Datový list Philips SWV3214W 12 ft Composite A/V cable, 2 stránky
SWV3532NZ/97	Datový list Philips SWV3532NZ 1,5 m Stereo Audio Composite A/V cable, 2 stránky
SWV2533/10	Datový list Philips SWV2533 3.0 m 3.5 mm (M) Composite A/V cable, 2 stránky
SWV3510/10	Datový list Philips Composite video cable SWV3510, 2 stránky
SWV2133/93	Datový list Philips SWV2133 3.0 m Composite video cable, 2 stránky
SWV2215W/10	Datový list Philips Composite AV cable kit SWV2215W, 2 stránky
SWV2212W/27	Datový list Philips SWV2212W 6 ft Composite A/V cable, 2 stránky
SWV3212S/10	Uživatelský manuál Philips SWV3212S/10 User manual, 1 stránky
SWV7532S	Manuál Philips SWV7532S/10 Manuel utilisateur, 1 stránky