Sharp QT-CD161 Dokumentacja Pobierz pdf (Strona 281)

Front Turn Signal, Parking and

Fog Lamps

A. Front Turn Signal/

Parking Lamp

B. Fog Lamp

(If Equipped)

To replace one of these bulbs, do the following:

1. Open the hood. See Hood Release on

page 243 for more information.

2. Reach underneath the front bumper and

locate the bulb assembly.

3. Turn the bulb socket counterclockwise and

pull out the bulb assembly.

4. Disconnect the bulb socket from the wiring

harness.

5. Install a new bulb.

6. Reverse the steps to reinstall the bulb

assembly and headlamp assembly.

Taillamps, Turn Signal, and

Stoplamps

To replace one of these bulbs, do the following:

1. Open the trunk. See Trunk on page 68

for more information.

2. Remove the two screws, which hold the

taillamp assembly, from inside the vehicle.

3. Remove the taillamp assembly.

4. Turn the bulb socket counterclockwise to

remove.

5. Pull the bulb from the socket.

6. Install a new bulb.

7. Reverse the steps to reinstall the taillamp

assembly.

281

1 2 ... 276 277 278 279 280 281 282 283 284 285 286 ... 395 396

Komentarze do niniejszej Instrukcji

Brak uwag